Customer service
Your cart is currently empty. Can't find what you are looking for? Contact our customer service.
Difficulty:
Moderate
Estimated time: ±
30 minutes
Want to replace your dishwasher's labyrinth, but not sure how? No worries, with this step-by-step plan you'll have it fixed in no time!
What do you need?
Always first:
Replacing the dishwasher labyrinth:
1. Take off the side panel of the dishwasher.
On the side where the water supply hose enters the unit, detach the side panel from the dishwasher by unscrewing the screws. In some cases, the top panel must first be removed from the unit to do this.
2. Pull the hose loose.
Remove the washer from the hose and pull the hose loose from the labyrinth.
3. Remove the old labyrinth from the dishwasher.
Disconnect the wiring by pushing the latch back with a screwdriver. Unscrew the cap of the labyrinth in the tub. Remove the old labyrinth from the dishwasher.
4. Insert the new labyrinth into the dishwasher.
Place the new labyrinth where the old labyrinth was and tighten the cap in the tub again. Reattach the wiring. Reconnect the hose including the washer.
5. Replace the housing.
Replace the side panel and possibly the top panel by tightening the screws. Your dishwasher is ready for use again!
Do you need assistance in your search for the right product? We are happy to help! Click here to send a message to our customer service.
Choose your appliance
Choose your brand
The correct number is the type- or model number and NOT the serial number. The model number is a row of numbers and/or letters. Sometimes the model number contains a hyphen (-) or a forward slash (/).
Can’t find your appliance? Send us a photo of the model number plate and a description of the product you are looking for, then we will send you a link to the correct product.