Dishwasher - Replace drain pump
Want to know how to replace the dishwasher drain pump? No problem, with our instruction video or written-out step-by-step plan, you'll have this fixed in no time!
Instruction video
Step-by-step plan
Tool
Product
Always first:
- Turn off the tap.
- Tip: When disassembling the old part, take frequent pictures, so you can easily see how to reassemble the new part.
1. Loosen the bottom of the dishwasher
The drain pump is located at the bottom of the dishwasher. Carefully lay the dishwasher on its side and loosen the underside. Loosen the underside, some appliances require you to loosen screws to do this, in this case there is a click system.
2. Remove the drain pump
The drain pump is attached to the housing by a click system. Your dishwasher may instead have it attached with screws. Disconnect the drainage pump and remove it from the appliance. Then disconnect the wiring.
3. Fit the new drain pump
Attach the wiring to the new drainage pump. Replace the new drain pump where the old one was.
4. Replace the housing
Reattach the bottom of the dishwasher. This can be done by snapping the underside into the retaining clips.
